Tisztító- és polírozószer fémfelületekre SHINE-X 500ml

The SHINE-X:
A class H1 cleaning and polishing agent that restores the original shine to most metal surfaces. The lightweight foam also allows effective use on vertical surfaces.
It can also be used perfectly in industrial kitchens, in food processing plants, restaurants, hospitals, dairies, bottling factories and in grocery stores.

• Provides long-lasting protection
• Cleans and polishes the surface in one step
• Sticks to all surfaces
• Is easy to use
• Is not flammable
• It consists of 100 percent food-safe components
• Develops its cleaning effect without the use of acids, abrasives and chlorine-containing solvents and leaves no traces.
• Resistant to fingerprints
• Allows you to clean wet surfaces with oily substances without causing the rainbow effect
• NSF-H1 certified product
• Reduces friction and protects against corrosion

AREAS OF APPLICATION AND USE:
SHINE-X can be used on most metal surfaces (e.g. stainless steel, polished aluminum, brass, red copper, chrome, polished mild steel, silver) can be used effectively. Excellent for use in commercial kitchens, food processing plants, restaurants, hospitals, dairies, factory fillers, grocery stores, etc.

Removal of finer scratches on the Plexiglas surface

AREAS OF APPLICATION AND USE:
SHINE-X can be used on metal surfaces (e.g. stainless steel, polished aluminum, brass, red copper, chrome, polished mild steel, silver) can be used effectively. Excellent for use in commercial kitchens, food processing plants, restaurants, hospitals, dairies, factory fillers, grocery stores, etc.

Removal of finer scratches on the Plexiglas surface

SHAKE THOROUGHLY BEFORE USE!
Spray SHINE-X onto the surface to be cleaned from a distance of approximately 20 cm. Allow it to work for a few minutes. Then wipe the surface with a clean, dry and soft cloth. Do not use the device in places where it can be directly exposed to the sunlight! In this application, cleaning is always done by doing it in the direction of the metal particles! If you want to form an anti-corrosion coating o the surface, then clean the product before applying the SHINE-X cleaning agent. Apply enough SHINE-X to the surface!

• Megjelenés: aerosol
• Szín: színtelen
• Illat: jellegzetes
• Forrási pont és tartomány: -40 °C
• Gyulladáspont: -80 °C
• Alsó robbanási határérték: 1 vol.%
• Felső robbanási határérték: 11 vol.%
• Sűrűség (20 °C-on): 0,862 g/cm3 (DIN 51757)
• Viszkozitás: 70 mm2/s
• Oldhatóság vízben: nem oldódik
• Minőségét megőrzi: 12 hónapig
• Biztonsági intézkedések: a biztonsági adatlapnak megfelelően.
• Kiszerelés: 500ml